PU Foam
Spree PU FOAM is a high-quality component of polyurethane foam and has excellent properties in bonding strength that allows it to adhere to a wide range of surfaces.
SPREE PU FOAM allows for professional grade filling of spaces between roof tiles, concrete slabs, wall cavities, drilled holes, frame construction, gaps around uPVC and aluminium wooden doors/windows and other substrates.
Spree PU FOAM is renowned for its high expanding yield.
DIRECTION FOR USE
- Shake the can vigorously for 30 seconds before and between uses
- Ensure that application area is dear of dirt, grease and dust
- Protect adjacent surfaces with tape or plastic film
- Remove the seal cap and attach a dean nozzle spray
- Hold the cylinder upside down and dispense slowly. Fill half of the application area only and allow the foam to expand.
- Foam begins to cure after ten minutes. Wait for one hour before doing the next step
- Use a sharp edged object to smooth and trim excess foam.
- Recommended single layer thickness is 5-8 cm. A 12 hour gap is required between application of each layer
- Excess and PU foam residue can be cleaned with paint thinner, acetone or nail polish remover
- For best results apply Spree PU Foam with a recommended temperature of 5C to 30C*
